Features:

Feature Of Receiver:

1. Professional DSP is used for audio processing.

2. Adopt environment-friendly and advanced zero power standby technology.

3. The output volume can be adjusted in real time, which can effectively prevent excessive distortion of audio output and hearing loss.

4. The OLED display screen can clearly display the current real-time status and indication of the device.

5. The removable battery process is adopted to relieve emergency needs.

6. The dual antenna reception can effectively improve the reception stability.

7. The two-color independent indication process is adopted, so that the receiving status and battery status can be clearly viewed in real time.

8. It supports infrared synchronization operation, and one button synchronization between the toilet host and the bodypack.

P3R Receiver:

RF carrier range: 566-590MHzNumber of channels: G (1~9) * C (1~16)Tuning bandwidth: 24 MHzDemodulation: Digital Demodulation (GFSK)Sampling rate: 46.875KHzResolution: 24BitsAudio processing mode: DSPAudio response: 20-20KHzFM mode: manual+infraredAudio output power: 80 mW (1kHz @<1%

distortion, peak power, @ 32 Ω 80 mW)Minimum load impedance: 16 ΩHeadphone output: 3.5 mm (1/8 inch) stereoAudio dynamic range: 110dB+A (200Kohm)Audio total harmonic distortion: – 94dBReceiving sensitivity:<- 95dBAntenna interface: SMAWorking current: 3V 240 ± 10MA (conversion

efficiency 94%)Battery life: 3-4 hours (continuous use)

No. 5 battery (depending on battery capacity and headphone output power)Operating temperature range: – 30 ° C to 85° C

P3T Transmitter:

RF carrier range: 566-590MHz

Number of channels: G (1~9) * C (1~16)

RF output power: 100mW

RF output impedance: 50 Ω

RF interface: BNC

Tuning bandwidth: 24 MHz

Modulation: digital modulation (GFSK)

Sampling rate: 46.875KHz

Resolution: 24Bits

Audio dynamic range: 103dB+A

Audio signal to noise ratio: 109dB+A

Typical value of delay: 6ms

Audio processing mode: DSP